Search

Keywords

Accessories

> Home > Our Products > Trains and accessories > Accessories

Hornby Analogue Train and Accessory Controller

As an alternative to the R8250 Controller, the Analogue Train and Accessory Controller features an improved, heavier casing, as well as an additional uncontrolled DC output with integral capacitor discharge unit (CDU) to support solenoid point motors. The Auxiliary output can also be used to power lighting on the layout up to a current of 150mA. A recessed reduction switch also limits the output to reduce loco speed. This item does not include a transformer. However, the required P9000 Transformer can be purchased separately.

NZ$ 61.90
Hornby Level Crossing, Double Track

1:76 Scale 00 Gauge
Measuring at 168mm in length, this double crossing comes with track mounded into the base at intervals to suit standard Hornby twin-track geometry. Supplied with traditional gates as shown and alternative modern barriers.
What's Inside
1x Track & Track Accessories

NZ$ 99.90
Hornby Station Over Roof

1:76 Scale 00 Gauge
With its highly detailed glass roof and painted finish, why not treat yourself or someone else to this Station Over Roof. Whether your layout is a busy city or a town center, this roof is a guaranteed winner! Consists of push-together assembly (seven parts) and fits in locating holes in two straight platform sections (not included). Length: 168mm x Width 197mm.

NZ$ 62.90
Hornby Elevated Track Supports

Set of four high level piers, plus two sets of seven inclined piers for the approach and exit. These piers clip to the track with a flexing 'clothes peg' action. The minimum track running length to a height of 80mmm with supports at 24 sleeper intervals is approximately 101mm. However, for a more gradual incline with the supports at 30 sleeper intervals, the overall running length increases to approximately 1967mm.

NZ$ 50.40
Hornby Pylons

Hornby Pylons
1:76 Scale 00 Gauge
Across many countryside views it's common to see electricity pylons lined up. If your layout involves lucious green hills, fields or country views then why not add this pylon set as a finishing touch to the scenery? Contents includes: 3 Pylons (Height 207mm).

NZ$ 49.95
Hornby Elevated Track Side Walls

Hornby Elevated Track Side Walls
1:76 Scale 00 Gauge
Elevated tracks are the ideal solution if your layout involves hills or heightened platforms, not to mention adding that extra level of creativity.Why not take this to the next level with this set of flexible planking and lattice sidewall sections, designed to fit curved or straight track on piers R658 and R659.Total length: 1220mm.

Elevated Track Running Length

The maximum track running length to a height of 80mm with supports at 24 sleeper intervals is approximately 1344mm. However, for a more gradual incline with the supports at 30 sleeper intervals the overall running length increases to approximately 1680mm.

NZ$ 66.90
Hornby Trak Mat

1:76 Scale 00 Gauge
The TrakMat measures in at 1800mm x 1200mm. As supplied with some Hornby train sets, TrakMat is the ideal as a base for your layout at any stage in its development. Extend your set in easy steps by adding Track Packs and TrakMat Accessory Packs all the way to the full layout pictured on the TrakMat.Item supplied is TrakMat only - other contents are for illustrative purposes only.

NZ$ 45.00
Hornby Underlay Sheets

Hornby Pack of 4 Underlay Sheets
1:76 Scale 00 Gauge
This pack of four sheets, measuring 267mm x 89mm each, is ideal for for cutting and fitting under trackside accessories that have to be raised to the level of the track.

What's Inside
4x Track & Track Accessories

NZ$ 14.90
Hornby Y Point Track

1:76 Scale 00 Gauge
Each Y Point track has a radius of 852mm and arcs 11.25'. To create parallel tracks from R8076 'Y' point use two R628 section curves. Hornby points are supplied for operation by hand. They may be converted to remote control electric operation by using a 'point motor'.

NZ$ 38.00
Hornby Left hand Curved Point Track

HORNBY Track Single 1x R8074 Left Hand Curved Point
Each track has a radius of 438mm and arcs at 22.5' and 33.75'. Hornby points are supplied for operation by hand and they may be converted to remote control electric operation by using a 'point motor'.

NZ$ 67.90
Hornby Left hand Express Point Track

Hornby Left hand Express Point Track

The Left Hand Express Point track has a length 245mm, radius of 852 and arc of 11.25'.

Hornby points are supplied for operation by hand and they may be converted to remote control electric operation by using a 'point motor'.

NZ$ 67.90
Hornby Right Hand Standard Point Track

Hornby Right Hand Standard Point Track.
This blister pack contains 1xR8073 Right Hand Pointtrack piece, at a length of 168mm, radius of 438mm and arc of 22.5'.Hornby points are supplied for operation by hand and they may be converted to remote control electric operation by using a 'point motor'.

NZ$ 46.90
Hornby Left Hand Point Track

Hornby HT8302 Left Hand Point x 1 Blister Pack
This blister pack contains 1xR8072 Left Hand Point track piece at a length of 168mm, radius of 438 and arc of 22.5'.Hornby points are supplied for operation by hand and they may be converted to remote control electric operation by using a 'point motor'.

Length - 30.3cm, Width - 10.5cm, Height - 0.7cm
1:76 Scale 00 Gauge
Number of Parts: 1

NZ$ 46.90
Hornby Right Hand Diamond Crossing Track

Diamond Crossing - Right Hand
1:76 Scale 00 Gauge
If you are after a railway crossing piece to mix up your layout a bit then the Diamond Crossing - Right Hand track will do just that!It has a length of 168mm x 181mm and angle of 22.5'. For parallel tracks use with 22.5° section curve or point.

NZ$ 48.90
Hornby Digital Power Track

Hornby Digital Power Track
1:76 Scale 00 Gauge
If you are seeking to try out a new piece of track extension then the The Hornby Digital Power Track is definitely one of a kind. Featuring a black painted finish, fitted with two connections and measuring at 168mm in length, what's not to love about this digital power track?
What's Inside
1x Digital Power Track

NZ$ 34.90
Hornby Electrically Operated Turntable

Hornby Electrically operated turntable
1:76 Scale 00 Gauge
The turntable is designed to operate with the Standard Train Controller R965. Drive the locomotive onto the turntable, then switch the power from track to turntable via the 'on-on' lever switch R046 (supplied with the set). Your speed controller now controls the rotation of the turntable. If you are using an HM2000 controller, then the turntable must be powered from the uncontrolled DC output with an R047 Lever Switch, 'on-off', not from the speed controller output.The set includes eight access track sections and wiring. You can add and subtract access sections to suit your layout, up to a maximum of fourteen.
What's Inside
1x Track & Track Accessories.

NZ$ 196.95

Out Of Stock
Hornby Extension Pack A

Hornby Extension Pack A
1:76 Scale 00 Gauge
Extend your set, in easy steps by adding Track Packs and TrakMat Accessory Packs all the way to the full layout pictured on your TrakMat scenic underlay sheet. Add Extension Pack A to the Starter Oval supplied with the smaller Hornby train sets to make this layout.Track Extension Pack A contents: Straight track (R600) x 1; Double straight track (R601) x 2; 2nd radius curve track (R606) x 1; Left hand point (R8072) x 1; Buffer stop (R083) x 1.

NZ$ 70.90
Hornby Extension Pack B

1:76 Scale 00 Gauge
Extend your set, in easy steps by adding Track Packs and TrakMat Accessory Packs all the way to the full layout pictured on your TrakMat scenic underlay sheet. Add Extension Pack B to the Starter Oval and Extension Pack A to make this layout. Track Extension Pack B contents: Straight track (R600) x 2; 2nd radius curve track (R606) x 1; Double curve 2nd radius track (R607) x 4; Right hand point (R8073) x 1; Buffer stop (R083) x 1.

NZ$ 131.90

«Prev 1 2 3 Next »